We are a comprehensive optical manufacturer of Opto mechatronics that commercializes customer needs from design and development.

Access Map

* Please check which department and office building you are accessing before coming to our office

TOYOTEC headquarters building

Headquarters(Toyo Circle office), Finance dept.

2-35, Nishiyutaka, Toyokawa, Aichi, 442-0024
TEL: +81 533 85 1110
FAX: +81 533 85 1458

From Tokyo (Narita Airport): About 4.5 hours.

1. Take Narita-Express from Narita, change trains at Tokyo.
2. Take Tokaido-Shinkansen from Tokyo, change trains at Toyohashi.
3. Take Iida-line from Toyohashi, and get off at Toyokawa
4. Take a taxi to TOYOTEC.

From Osaka (Kansai Airport): About 3.5 hours.

1. Take Haruka Express from Kansai, change trains at Shin-Osaka.
2. Take Tokaido Shinkansen from Shin Osaka, and get off at Toyohashi.
3. Take Iida line from Toyohashi, and get off at Toyokawa.
4. Take a taxi to TOYOTEC.

From Nagoya (Central Japan Airport): About 2.0 hours.

1. Take Meitetsu-line from Central Japan Air port, change trains at Nagoya.
2. Take Tokaido-Shinkansen from Nagoya to Toyohashi and change trains.
3. Take Iida-line from Toyohashi, and get off at Toyokawa
4. Take a taxi to TOYOTEC

Access by car

Get off at the Toyokawa IC of the Tomei Expressway, head toward Toyohashi, turn right at the “Tomei-machi 1-chome” intersection, turn left at the “Shin-Toyo-machi” intersection (2 minutes), and you will see our headquarters on the right side of the road.

TOYOTEC Manufacturing Department

General Affairs, HR dept.

2-35 Shinyutakamachi, Toyokawa-shi, Aichi 442-0012

TEL: +81 0533 85 1185
FAX: +81 0533 89 0801

Technical Center (R&D, Sales, Plastic Lens Technical Division, Quality Assurance)

2-30 Shinyutakamachi, Toyokawa-shi, Aichi 442-0012

TEL: +81 0533 85 2450
FAX: +81 0533 85 6033

Technical Center for Plastic Lens Manufacturing ( Juko Co., Ltd.)

2-38, Shin Yutaka machi, Toyokawa, Aichi, 442-0012

TEL: +81 533 85 7755
FAX: +81 533 56 7457

From Tokyo (Narita Airport): About 4.5 hours.

1. Take Narita-Express from Narita, change trains at Tokyo.
2. Take Tokaido-Shinkansen from Tokyo, change trains at Toyohashi.
3. Take Iida-line from Toyohashi, and get off at Toyokawa.
4. Take a taxi to TOYOTEC.

From Osaka (Kansai Airport): About 3.5 hours.

1. Take Haruka Express from Kansai, change trains at Shin-Osaka.
2. Take Tokaido Shinkansen from Shin Osaka, and get off at Toyohashi.
3. Take Iida line from Toyohashi, and get off at Toyokawa.
4. Take a taxi to TOYOTEC.

From Nagoya (Central Japan Airport): About 2.0 hours.

1. Take Meitetsu-line from Central Japan Air port, change trains at Nagoya.
2. Take Tokaido-Shinkansen from Nagoya to Toyohashi and change trains.
3. Take Iida-line from Toyohashi, and get off at Toyokawa
4. Take a taxi to TOYOTEC

Access by Car

Get off at the Toyokawa IC on the Tomei Expressway, head toward Toyohashi, turn right at the Tomei-machi 1-chome intersection, turn left at the Shin-Toyo-machi intersection (1 minute), and you will see the Manufacturing division offices on the left side of the road.

General Affairs
Technical Center for Optical Glass Lens
Technical Center for Plastic Lens

Feng Ji Glass Lens & Unit Factory

Address:

Room 101 building 8,142
Jinghai West Road, Changan Town,DongGuan City,
GuangDong Province PR China.
Post Code:523863

TEL: +86  769 85391510  FAX: +86 769 85391520

 

Dong Xiu Plastic Lens Factory

Address :

Building 26, No. 84, ZhongNan Middle Road, Shang sha
Village,Chang ‘an Town, Dongguan City, Guangdong
Province. P.R. China.
Post Code:523800

TEL:  +86 769 81505351   FAX: +86 769 81505312

Access to TOYOTEC China Factory

1. From H.K. International Airport to Main Land China via Ferry

1. Go to Ticket counter of Ferry at Hong Kong International Airport and buy ticket bound for Shenzhen Fuyong.
(Be careful NOT go through the immigration )
*Ferry service is for transit passengers only.
It is not applicable to passengers originating in Hong Kong.

2.Take a shuttle (on the 1F) to Boarding point of Ferry.

3. Take a ferry bound for Shenzhen Fuyone

4. After arriving Shenzhen Fuyong, immigration clearance is required.
(Please prepare the passport and E/D card in advance. )

5. 30 minutes drive from Fuyong port to TOYOTEC China factor

2. From H.K.International Air port to Main Land China via Mini-Bus

1. After going through immigration clearance and entering Hong Kong, go out Airport entrance.

2. Go to the bus company counter (Front side of Exit A) and buy ticket bound for “Chang An Hotel”.When buying bus ticket, the seal tag (長安酒店) of bus company is given in order to identify the passengers.

3. Depart from Hong Kong International Airport.

4. Immigration clearance (Exit Hong Kong and Enter China) in vehicle.
(Please prepare the passport and E/D card in advance. )

5. In Shenzhen, make a bus transfer and select the bus bound for “Chang An Hotel” following the instruction of guide.

6. Arrive at “Chang An Hotel”

7. 20 minutes drive from Chang An Hotel to TOYOTEC China factory

*We explain the shortest route from H.K. International air port to TOYOTEC China factory.

TOYOTEC PHILIPPINES INC.

Address :

Phase 1 Blk 24 Lot 1
SHENG U BLDG No.4, LIMA TECHNOLOGY CENTER,SEZ,
SAN LUCAS,LIPA CITY BATANGAS,PHILIPPINES 4217

Acess to TOYOTEC PHILIPPINES INC

From Ninoy Aquino International Airport (NAIA)

1. Book an airport cab to the Lima Technology Center.

2.It takes about an hour and a half by cab to get there.

   TOYOTEC Philippines is located in the Lima Technology Center.

 

TOYOTEC Co., Ltd. German Representative Office

Address :

Friedrichstrasse 15, 70174 Stuttgart, Germany
Post Code:70174

Acess to TOYOTEC Co., Ltd. German Representative Office

From Stuttgart Central Station

1. Friedrichstrasse, 4 minutes walk.

From Stuttgart Airport

1. About 20 minutes by cab from Stuttgart Airport

※There is also a Regus office on Koenigstrasse, so please be sure to visit the Friedrichstrasse office.

Back To Top
error: Content is protected !!